Electronic accessories

More sub catagories:

New Products



H0 Deer with movable head 1580 H0 Deer with movable head
Attention living animals!
The deer moves his head.
Mounting depth: 39 mm

Fits perfectly to item-No. 1529 huntsman with gun and muzzle flash.

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


39,60 EUR
incl. 19 % Tax excl.
1 x 'H0 Deer with movable head ' order

H0 Stonemason, movable 1556 H0 Stonemason, movable
The stonemason hammers on the chisel with the mallet. With underfloor drive unit.
Mounting depth: 39 mm

Suitable Vollmer stonemason building item-No. 48280 and stonemason accessories item-No. 48281.

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


30,70 EUR
incl. 19 % Tax excl.
1 x 'H0 Stonemason, movable ' order

Multi-protocol switching decoder  5285 Multi-protocol switching decoder
Decoder is multi protocol for DCC- and Märklin-Motorola-format. Equipped with 4 powerful relays with one double-pole double-throw contact and controls 2 servos.
Features: 4 separate DPDT outputs, potential free, bi stable outputs, switching position is obtained even without supply voltage. Supply out of the track signal, steady current up to 5 A each output, LEDs on the outputs signals the switch command, track entry, programming at the programming track, programming at the main track (POM), address programming even by taster, RailCom.
Servo outputs can be configurated according to adjustment travel and speed, power supply for both servos: total 300 mA currently, 450 mA short time. With screw terminals.

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


52,90 EUR
incl. 19 % Tax excl.
1 x 'Multi-protocol switching decoder  ' order

H0 Coach lighting, 11 LEDs, warm-white  5050 H0 Coach lighting, 11 LEDs, warm-white
Coach lighting variously divisible with power-saving, maintenance free, bright LEDs. Brightness adjustable by potentiometer.
Can be used in any lighting prepared coaches of all manufactures. By shortening the circuit board, it can be adapted to various waggon lengths.
Constant power supply integrated, prepared for flicker-protection. Power supply by grinder/point unit or conducting couplers item-No. 5048/5071.
Suitable for DC, AC or digital power.
Maximum power input 38 mA.
Dimensions: ca. L 254 x W 7 mm

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


9,40 EUR
incl. 19 % Tax excl.
1 x 'H0 Coach lighting, 11 LEDs, warm-white  ' order

H0 Train rear lanterns with LED, 2 pieces 5056 H0 Train rear lanterns with LED, 2 pieces
2 red LEDs to light rear lights on rail vehicles. Designed to connect with the Viessmann coach lightings item-No. 5046, 5049, 5050, 5076, 5077, 5078 with already integrated series resistors.
By use of these components the connection of the LEDs is possible also directly to the rail tension or to the outputs of the function decoders.
Diameter LEDs 1,8 mm, cable length ca. 90 mm.

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


3,30 EUR
incl. 19 % Tax excl.
1 x 'H0 Train rear lanterns with LED, 2 pieces ' order

Plug-in rail for interior lighting on board, 12-pold 6049 Plug-in rail for interior lighting on board, 12-pold
The practical 12-pin plug-in rail connects up to 12 power consumers - simply by jacks for plugging in the resistors and diodes.
Suitable for using with LED-floor interior lighting item-No. 6045 6048. No plug, screw terminals or soldering required.
Dimensions: L 3,2 x W 2,1 x H 0,7 cm

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


4,90 EUR
incl. 19 % Tax excl.
1 x 'Plug-in rail for interior lighting on board, 12-pold' order

H0 Hydraulic excavator with drill, drill rotating and headlights 21279 H0 Hydraulic excavator with drill, drill rotating and headlights
With rotating drill, e. g. for digging basements at construction sites and with illuminated headlights. The screw is not adjustable in the height.
Dimensions: L 7,5 x W 4,8 x H 24 cm.

Tip: Suitable power module item-No. 5215 offers flicker-free lighting. Nearly double brightness is possible.

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


83,10 EUR
incl. 19 % Tax excl.
1 x 'H0 Hydraulic excavator with drill, drill rotating and headlights' order

H0 Tractor FENDT with illumination and yellow blinking light 1166 H0 Tractor FENDT with illumination and yellow blinking light
Great addition for farms of epochs IV VI. The model FENDT Vario Favorit 926 is equipped with functional front- and rear lights, maintenance free by LED lighting and yellow blinking light on the top.
Dimensions: L 5,5 x W 3,0 x H 4,0 cm.

Tip: Suitable power module item-No. 5215 offers flicker-free lighting by using AC power. Nearly double brightness is possible. Fits perfectly to kibri item-No. 38808 Farm house in Emmental.

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


45,80 EUR
incl. 19 % Tax excl.
1 x 'H0 Tractor FENDT with illumination and yellow blinking light' order

H0 LIEBHERR 974 with pneumatic chisel and headlights 0 H0 LIEBHERR 974 with pneumatic chisel and headlights
Cleans up: The huge excavator is equipped with pneumatic chisel and functional front- and working headlights. Maintenance free by LED lighting.
Dimensions: L 14 x W 5 x H 6 13 cm

Tip: Power module item-No. 5215 offers flicker-free lighting by using AC power. Nearly double brightness is possible.

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


61,30 EUR
incl. 19 % Tax excl.
1 x 'H0 LIEBHERR 974 with pneumatic chisel and headlights' order

Motorized point- and universal drive unit (scale independent) 4560 Motorized point- and universal drive unit (scale independent)
Powerful and quiet unit with slow movement to set points and signals and more movable items. Suitable decoder is mounted as component inside the cable so the drive is very compact. The drive is equipped with longitudinal and lateral adapters.
Therefore it can also be used for turnouts bed or for other purposes. Numerous adapters are attached to drive a lot of common points from gauge N to 1.
Max. movement range: 10 mm
Dimensions: L 45 x W 20 x H 6,5 mm

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


31,10 EUR
incl. 19 % Tax excl.
1 x 'Motorized point- and universal drive unit (scale independent)' order

H0 Point motor for Märklin/Trix C track  4558 H0 Point motor for Märklin/Trix C track
This special point motor is a powerful and quiet unit with integrated decoder. Usable for Märklin and Trix C track system turnouts. Decoder is mounted as component inside the cable so the drive is very compact. Extraordinary and very realistic slow movement of the point rails.
Speed and motion are controlled by the built-in electronics which warrants a very sensitive adjustment. If - due to the characteristics of your turnout - the direction of the turnout doesn`t fit with the switching direction of the digital command station, it is possible to set the drive motor to reverse mode.
The associated decoder is suitable for DC/AC, MM and DCC and is able to send the requested position or the actual position by RailCom to corresponding digital command stations, e. g. Viessmann Commander item-No. 5300. Analogue mode is possible, too.
Additional switching outputs for a conventional feedback and core polarization complete the functions. Functions are configurable.
This special point drive is only suitable for Märklin/Trix C track system turnouts. The drive can be installed in the following Märklin-C turnouts (turnouts with track bed): - 24611 left turnout 188,3 mm / R2 = 437,5 mm / 24,3. Manual. - 24612 right turnout 188,3 mm / R2 = 437,5 mm / 24,3. Manual. - 24624 double slip switch 188,3 mm / 24,3. With electric mechanism and lighted double slip switch lantern - 24630 three way turnout (2.pieces drives) length 188,3 mm/2 x 24,3 - 20671 left curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 30. Outer curve: 30 with the parallel curve spacing of 77,5 mm. - 20672 right curved turnout with a manual hand lever. Inner curve: R1 = 360 mm / 30. Outer curve: 30 with the parallel curve spacing of 77,5 mm. - 24671 left curved turnout. Inner curve: R1 = 360 mm / 30. Outer curve: 30 with the parallel curve spacing of 77,5 mm. Manual hand lever included. - 24672 right curved turnout. Inner curve: R1 = 360 mm / 30. Outer curve: 30 with the parallel curve spacing of 77,5 mm. Manual hand lever included.24711 left hand wide radius turnout. Length 236,1 mm. Branch track radius 1114,6 mm. Turnout curve 12,1. 10 metal frog. - 24712 right hand wide radius turnout. Length 236,1 mm. Branch track radius 1114,6 mm. Turnout curve 12,1. 10 metal frog. The drive can be installen in the following Trix C turnouts (turnouts with track bed): - 62611 left turnout 188,3 mm, R2 = 437,5 mm, 24,3 Manual hand lever included. - 62612 right turnout 188,3 mm, R2 = 437,5 mm, 24,3 Manual hand lever included. - 62624 double slip switch 188,3 mm, 24,3 with drive - 62671 left curved turnout R1=360 mm, 30 Manual hand lever included. - 62672 right curved turnout R1=360 mm, 30 Manual hand lever included. - 62711 left hand wide radius turnout - 62712 right hand wide radius turnout.

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


33,40 EUR
incl. 19 % Tax excl.
1 x 'H0 Point motor for Märklin/Trix C track  ' order

H0 Level crossing with decorated barriers, fully automatic 5107 H0 Level crossing with decorated barriers, fully automatic
With mirrored printing to build a four-arm barrier in connection with item-No. 5104. Level crossing equipped with 2 underfloor driven units.
The drive provides slow movement opening and closing of the barriers. The street can be lead across by any quantities of tracks. Board crossing pieces, access ramps and printed road signs are attached.
Integrated decoder is multi protocol and recognizes DCC and MM format. For automatic use switching tracks resp. switching contacts item-No. 6840 are required. More information is provided in our signal book item-No. 5299 German version.
To mountain four-arm item-No. 5107 mirrored model is required. More connectors offered by item-No. 5105 (2 rail) and 5106 (3 rail).
Barrier lengh: ca. 63 mm.

Tip: Suitable sound module item-No. 5556 provides sound according to the movement of the barrier arm.

Operation Manual

This production is not a toy! Not suitable for children under 14 years!



86,70 EUR
incl. 19 % Tax excl.
1 x 'H0 Level crossing with decorated barriers, fully automatic' order

H0 Train rear lighting modern, 2 pieces for low side car 2320 H0 Train rear lighting modern, 2 pieces for low side car
The train rear lighting is suitable for low side car item-No. 2310, 2311, 2315, 2316 and the UNIMOG with low side car item-No. 2680 and 2681.

Operation Manual
Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


17,80 EUR
incl. 19 % Tax excl.
1 x 'H0 Train rear lighting modern, 2 pieces for low side car' order

H0 Organ grinder, moving 1549 H0 Organ grinder, moving
Hand organs could be found on a lot of public places as an attraction. The organ grinder with prototypical moving fits on all layouts. With underfloor drive unit.
Mounting depth: 38 mm

Tip: Suitable sound module item-No. 5575 provides sound according to the movement of the figure.

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


36,90 EUR
incl. 19 % Tax excl.
1 x 'H0 Organ grinder, moving ' order

H0 Gatekeeper, moving 1550 H0 Gatekeeper, moving
The gatekeeper operates the barrier winch. So the item fits to nearly all manually operated barriers of epoch IV. With underfloor drive unit.
Mounting depth: 38 mm

Operation manual


Attention!

Subject to alterations in assortment, printing, shape and colours
This production is not a toy! Not suitable for children under 10 years!


35,50 EUR
incl. 19 % Tax excl.
1 x 'H0 Gatekeeper, moving ' order
Parse Time: 0.092s