Cars

More sub catagories:

New Products



Citroen DS break red / white H2922 Citroen DS break red / white
2 warm white and 2 red LEDs, ready for connection,
with assembled driver figur

Special-LED (red), tiny!

with assembled figur

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung


29,90 EUR
incl. 19 % Tax excl.
1 x 'Citroen DS break red / white' order



27,90 EUR
incl. 19 % Tax excl.
1 x 'Austin Healey 300' order
Austin Healey 300 H2980 Austin Healey 300
2 warm white and 2 red LEDs, ready for connection,
with assemblrd driver and co-driver

Special-LED, tiny!

with assembled figur

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



29,90 EUR
incl. 19 % Tax excl.
1 x 'Mercedes Benz L 319 van Tesa Film' order
Mercedes Benz L 319 van Tesa Film H0185 Mercedes Benz L 319 van Tesa Film
2 LEDs warm white and 2 LEDs red, ready for connection,

with assembled driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



28,90 EUR
incl. 19 % Tax excl.
1 x 'VW T1 transporter double cabine yellow' order
VW T1 transporter double cabine yellow H0316 VW T1 transporter double cabine yellow
2 warm white and 2 red LEDs, ready for connection,
with assembled driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



31,90 EUR
incl. 19 % Tax excl.
1 x 'Opel Kapitän P 2.6 blue / white ' order
Opel Kapitän P 2.6 blue / white H0052 Opel Kapitän P 2.6 blue / white
2 LEDs warm white and 2 LEDs red, ready for connection,

with assembled driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



31,90 EUR
incl. 19 % Tax excl.
1 x 'Opel Kapitän P 2.6 blue / white ' order
Opel Kapitän P 2.6 blue / white H0052 Opel Kapitän P 2.6 blue / white
2 LEDs warm white and 2 LEDs red, ready for connection,

with assembled driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



31,90 EUR
incl. 19 % Tax excl.
1 x 'Opel Kapitän P 2.5 salmon red' order
Opel Kapitän P 2.5 salmon red H0054 Opel Kapitän P 2.5 salmon red
2 LEDs warm white and 2 LEDs red, ready for connection,

with assembled driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



31,90 EUR
incl. 19 % Tax excl.
1 x 'Opel Kapitän P 2.6 red / white' order
Opel Kapitän P 2.6 red / white H0055 Opel Kapitän P 2.6 red / white
2 LEDs warm white and 2 LEDs red, ready for connection,

with assembled driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung

Mercedes Benz 190 D taxi beige (W 201) H0118 Mercedes Benz 190 D taxi beige (W 201)
2 LEDs warm white and 2 LEDs red, ready for connection,

taxi sign is led by two yellow LED, can separately be switched on / off
with assembled figur

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung


41,90 EUR
incl. 19 % Tax excl.
1 x 'Mercedes Benz 190 D taxi beige (W 201)' order



29,90 EUR
incl. 19 % Tax excl.
1 x 'Citroen H van' order
Citroen H van H2950 Citroen H van
2 warm white and 2 red LEDs, ready for connection,

with assembled figur

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



29,90 EUR
incl. 19 % Tax excl.
1 x 'Citroen H caravan' order
Citroen H caravan H2955 Citroen H caravan
2 warm white and 2 red LEDs, ready for connection,

with assembled figur

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



32,90 EUR
incl. 19 % Tax excl.
1 x 'BMW 327 Cabrio yellow' order
BMW 327 Cabrio yellow H0550 BMW 327 Cabrio yellow
2 LEDs warm white and 2 LEDs red, ready for connection,

with assembled driver and co-driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



32,90 EUR
incl. 19 % Tax excl.
1 x 'BMW 327 Cabrio green' order
BMW 327 Cabrio green H0551 BMW 327 Cabrio green
2 LEDs warm white and 2 LEDs red, ready for connection,

with assembled driver and co-driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung



32,90 EUR
incl. 19 % Tax excl.
1 x 'BMW 327 Cabrio blue' order
BMW 327 Cabrio blue H0552 BMW 327 Cabrio blue
2 LEDs warm white and 2 LEDs red, ready for connection,

with assembled driver and co-driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

Montageanleitung

  Montageanleitung

27,90 EUR
incl. 19 % Tax excl.
1 x 'Horch 853 Cabrio open red metallic' order
Horch 853 Cabrio open red metallic H1952 Horch 853 Cabrio open red metallic

2 LEDs warm white and 2 LEDs red, ready for connection,
with assembled driver and co-driver

The cable is attached to a 16V DC-Voltage or an AC-Voltage. By configuration with the transient suppression the cable has to be attached to a protective diode which is at the plus pole (yellow). When using the DC-Voltage pay attention to the polarity!

This production is not a toy! Not suitable for children under 14 years!

 
Parse Time: 0.129s